Sound Effect track: LYN064: Industry & Machinery, Set 3 - Car Workshop

By Lynne Sound FX

62 sounds you might hear in a Car Workshop or other mechanical / industrial garage or workshop, including pneumatics, metal hammering, sheet metal, anvil hits, disc sander, spray paint, rattling chains and much more. WAV files, 16-bit, 44.1 khz. These sounds are in mono except where noted as stereo.

Car Workshop Ambience:: Car workshop ambience. Garage interior with air compressor noise, hits, paint gun and sander. Seamless loop. (stereo) (01:24)

Air Compressor Loop 1: Medium size air compressor, close, very noisy, low rumble, seamless loop. Can also be a power generator or general motorized utility. (0:04)

Air Compressor Loop 2: Medium size air compressor, medium distance, soft noise, seamless loop. Can also be a power generator or general motorized utility. (0:08)

Air Compressor Start: Medium size air compressor being started, strap sliding at start. (0:06)

Anvil Drag: Small anvil being dragged along floor, a short distance (0:01)

Blowpipe: Blowpipe, starting, adjusting and controlling the flames, and then operating loudly (0:38)

Chains Moving 1: Heavy chains moving, rattling into each other quietly, and then and clanking against floor loudly, three times. (0:14)

Chains Moving 2: Several heavy chains being moved, shaken, rattling and clanking into each other (0:17)

Disc Sander Long: Disc sander working in the air, start and ending noises, long. (0:09)

Disc Sander On Metal: Disc sander working on solid metal, with starting and ending noises (0:18)

Disc Sander Short: Disc sander working in the air, start and ending noises, short (0:06)

Drag Tools 1: Three or four metal tools being dragged a short distance on a floor (0:01)

Drag Tools 2: Metal tools, light to moderate, being dragged on floor over a short distance (0:01)

Drag Tools 3: A single metal tool being dragged on floor, a short distance. (0:01)

Drag Tools 4: Tools being dragged across the floor, impacting with the floor and with other tools. (0:01)

Drag Tools 5: Several tools being moved together on the floor, heavy and light metal tools. (0:01)

Dragging Chains: Heavy chains being dragged in the floor through a long space. (0:04)

Falling Tools 1: Several metal tools falling onto floor, short sound. (0:01)

Falling Tools 2: A long metal tool sliding on a table, falling off, hit floor and impact with a ringing sound. (0:01)

Falling Tools 3: Several tools hitting the floor, and being dragged in sequence. (0.01)

Fire Extinguisher Long: Powder fire extinguisher, long shot beginning slowly, with the valve slightly pressed, towards the end being fully pressed. (0:06)

Fire Extinguisher Short 1: Powder based fire extinguisher, a short shot, very hard and rash, close to the listener perspective. (0:01)

Fire Extinguisher Short 2: Powder based fire extinguisher, short shot. Softer sound, a little further from listener perspective. (0:01)

Fire Extinguisher Twice: Powder based Fire extinguisher, two short bursts. (0:01)

Hammer Anvil: Metal hits. Blacksmith hammering a piece of solid metal on anvil. Four hammer impacts. (0:03)

Hammer Bodywork Fast: Car bodywork being hammered, several metal hits, rattling metal noises. (0:13)

Hammer Bodywork Slow: Car bodywork being hammered, slowly, several metal hits, rattling and very resonant. (0:09)

Hammer Hit Bodywork 1: Hammer impact on car bodywork, one hit, tight metal piece sound. Metal impact with reverb. (0:02)

Hammer Hit Bodywork 2: Hammer impact on car bodywork, one hit, rattling metal impact sound, resonant. (0:01)

Hammer Metal Floor: Hammering a piece of metal on hard concrete floor. High pitched metal clanking, dinks, clinks. (0:21)

Heat Gun Light Click: Hot air heat gun, long shot, low power (first level), with key click on/off. (0:04)

Heat Gun Light Long: Hot air heat gun, long shot, low power (first level). (0:04)

Heat Gun Light Short: Hot air heat gun, short shot, low power (first level). (0:02)

Heat Gun Strong Click: Heat gun, long shot, high power, with key click on/off. Also works well as a food mixer, drinks mixer or mixmaster. (0:05)

Heat Gun Strong Long: Heat gun, long shot, high power. Also works well as a food mixer sound, drinks mixer or mix master sound. (0:05)

Heat Gun Strong Short: Heat gun, short shot, high power (second level). (0:02)

Heavy Machinery: Heavy machinery being moved rhythmically. Metal squeaking and slight rattling. (0:03)

Hit Bodywork Soft: Deep, booming metal impact. Soft object impacting with large piece of car bodywork. Metal bang, almost Gong like. (0:02)

Hit Metal Pipe 1: Metal pipe impact, hit metal on metal, clank, dink. (0:02)

Hit Metal Pipe 2: Metal pipe struck by a piece of metal. Metal impact, dink, clank, clang, hit. (0:01)

Hit Metal Pipe 3: Metal pipe hit. Hammer impact on metal pipe. Metallic hit, clank, dink, clink sound. (0:01)

Hit Metal Pipe 4: Metal pipe falls to floor, impact with floor. Single metal hit, muffled, short, defined metal clank. (0:01)

Hit Metal Pipe 5: Metal pipe impacts with floor, slight metal rattle sound with sharp clank. (0:01)

Hit Metal Pipe 6: Metal pipe hit by stone. Ringing metal clank, dink. Resonant metal hit. (0:01)

Orbital Sander Long: Orbital sander, start, run for a while, shut off and slowly come to a stop. Also good as ceramic drill sound. (0:13)

Orbital Sander Short: Orbital sander, start, shut off and slowly come to a stop. Also good as ceramic drill sound. (0:07)

Paint Spray Gun Leak: Aerosol, paint spray gun. Several bursts of varying lengths. Very slight leak in valve. (0:16)

Paint Spray Gun Long: Aerosol, paint spray can, spray paint, single long burst. (0:04)

Paint Spray Gun Medium: Aerosol, paint spray gun, spray paint, spray can, medium length burst. (0:03)

Paint Spray Gun Several: Aerosol, paint spray can, spray paint, painting a piece of bodywork, several short bursts. (0:22)

Paint Spray Gun Short 1: Aerosol, spray can, paint spray gun, short burst. (0:01)

Paint Spray Gun Short 2: Aerosol, spray can, paint spray gun, even shorter burst. (0:01)

Pneumatic Jack Drag: Pneumatic jack dragged and positioned under a car. Several metal squeaks, scrapes, drags, clanks, rattles. (0:11)

Pneumatic Jack Rise: Pneumatic car jack being pumped, jacked up. Lots of metallic squeaking and creaking. (0:12)

Sawing Metal: Metal saw, band saw, sawing metal with a manual band saw, the sawed piece falling off at the end. (0:09)

Test Car Engine 1: Testing a car engine. Turn key, ignition, rev and let the engine run for a little while, then shut off. (0:13)

Test Car Engine 2: Testing a car engine. Turn key, ignition, four moderate revs, then switch off. (0:09)

Test Car Engine 3: Testing a car engine. Ignite engine, start up, two moderate revs, shut off. (0:06)

Test Car Engine 4: Testing a car engine, ignition, slowly increase RPM, two moderate revs, then shut off. (0:18)

Test Car Engine Fail: Testing a car engine, attempt to start car, ignition fails. Starter motor running but no ignition. (0:08)

Wheel Drag Long: Car wheel without tyre being dragged on metal floor. Great metal on metal scraping sound. Metal slide, Long. (0:02)

Wheel Drag Short: Car wheel without tyre being dragged on metal floor. Great metal on metal scraping sound. Metal slide, Short. (0:01)

All above 62 sounds: Complete Industry & Machinery Set 3 - Car Workshop

Track details

Track ID number:	4938
Genres:	Industry & Machinery
Artist:	Lynne Sound FX
SRCO (Sound Recording Copyright Owner):	Bjorn Lynne
WAV file bit depth:	CD-quality / 16-bit (What's this?)
Stem files available for this track:	No
Album containing this track:	(None)